江苏地磅，地磅性能

江苏地磅，地磅性能，我厂地磅焊接采用二氧化碳保焊连续焊缝，型腔全密封，耐腐蚀。施工工艺简单、快速。采用两次底漆、两次面漆，防水防锈，可以长期保护磅体表面。标准配置：磅体一套（长度6~24任选），传感器一套（根据长度4颗、6颗、8颗、10颗不等）显示仪表一台（内带打印机），接线盒一只，信号线若干米（根据磅房离地磅的长度而定）。可选配制：针式打印机、电脑、称重软件、摄像头、无人值守系统、外接显示大屏幕等。

上海鹰衡称重设备有限公司下属江苏工厂-江苏鹰衡称重设备制造有限公司，占地60亩，专业的地磅、汽车衡生产研发中心。 江苏全境：徐州、宿迁、连云港、盐城、准安、扬州、泰州、镇江、南京、南通、无锡、常州、苏州，全境上门看现场、签定地磅合同、地磅基础施工指导、地磅安装、地磅调试、地磅维修、地磅校正！预约-

江苏地磅，地磅性能，我厂地磅材料：采用横截面板中幅板（立筋板）和纵向截面中支点跨距对刚度影响zui大，本公司每节秤台有40根立筋板，面板厚度10mn，宽3m，采用6根主梁，主梁厚8mm主梁高度320mm，秤台总高度达到340mm（面板均采用开平钢板整板焊接，从源头保证秤体的强度和韧性，U型梁均采用一体化整板折弯，不焊接，不拼板，保证了秤体的抗冲击力）从而保证秤台整体的刚性，秤台的不变形，才能在使用过程中秤体的受压力均衡，这样不但保证了称量对准确度，而且延长了传感器的使用寿命，也增加了整台秤的正常使用，和减少了维修的可能性。
，鹰衡地磅厂家服务承诺
安装：免费到需方现场安装
质量负责的条件和期限：对产品整机（特殊部件已保修卡为准）实行保修，已安装调试完毕之日起公历36个月为保修期（人为和自然不可抗拒因素不在保修范围内）在此期间，如发生非产品质量的故障和损坏，卖方服务的费用由买方承担，卖方继续提供有偿服务。在使用中如出故障后我方在24个小时内派员到需方处理排除故障。

，鹰衡地磅厂生产工序，因厂家及规格的不同可能略有区别，我厂地磅生产主要由以下过程组成：
1.钢材选料：根据型号及吨位，选择相应标号的钢材，比如面板的选材:10mm,l2mm,14mm等，主梁及封板选材等等
2.对材料进行加工裁剪等
3.按照地磅钢结构图纸进行焊接
4.地磅秤体框架焊接完毕后，进行打磨、除锈、抛丸等表面处理
5.进行多道喷漆工艺，比如喷防腐漆，面漆底漆等
6:安装称重传感器及穿线
7.连接称重仪表及进行砝码标定
8.贴标牌及进行检验
9.出检验单及合格证
鹰衡称重因为专业，所以专心专注，所以才有好的品质与服务！

主要有哪些？您可致电：姜

A man is driving up a steep, narrow mountain road. a woman is driving down the same road.
As they pass each other, the woman leans out of the window and yells "pig!!"

The man immediay leans out of his window and replies, "witch!!"

They each continue on their way, and as the man rounds the next corner, he crashes into a pig in the middle of the road.
if only men would listen.////
The Second World War had begun, and John wanted to join the army, but he was only 16 years old, and boys were allowed to join only if they were over 18. So when the army doctor examined him, he said that he was 18.
But John‘s brother had joined the army a few days before, and the same doctor had examined him too. This doctor remembered the older boy‘s family name, so when he saw John‘s papers, he was surprised.